Changing The Main Battery - Toshiba A10-S100 User Manual

122
Mobile Computing

Changing the main battery

the computer to enter Standby mode or Hibernation mode, or
to Turn Off or Shut down when the alarm goes off.
To set an alarm:
1 Click Start, then click Control Panel.
The Control Panel window appears.
2 Click Performance and Maintenance.
3 Click the Toshiba Power Saver icon.
The TOSHIBA Power Saver Properties window appears.
You can also access the TOSHIBA Power Saver Properties
window by using the TOSHIBA Console. See
Console" on page
4 Choose the Power Save Modes tab, then under the
Running on Batteries section, click Details.
5 Click the Alarm tab and set the alarm, as desired.
Changing the main battery
When your battery power is running low, you have two
options—connect the computer to an AC power source or
install a charged battery.
189.
If your battery discharges fully, your information will be lost.
Be sure to save your work often.
When handling a battery, be careful not to drop it or short-
circuit its terminals. Also, do not drop, hit or otherwise impact
the battery. Do not scratch or break the casing and do not twist
or bend the battery pack.
Do not remove the battery pack while the computer is in
Standby mode. Data in memory will be lost.
"TOSHIBA