Going into Standby mode more quickly
In addition, you can put the computer into Standby mode by
either pressing the power button or closing the display panel.
You can also specify an amount of time after which the
computer automatically goes into Standby mode.
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1
Open the Start menu, then click Control Panel.
2
Click the Performance and Maintenance icon, and then
click the Toshiba Power Management icon.
3
Click the Advanced tab.
4
Select Standby for the options you want.
When I press the power button
Set this option to Standby to put the computer into
Standby mode when you press the power button.
When I close the lid
Set this option to Standby to put the computer into
Standby mode when you close the display panel.
5
Click OK.
6
Close the Control Panel.
Starting again from Standby
To start the computer from Standby mode, press the power
button. The computer returns to the screen you were using.
If you put the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
Learning the Basics
Using Standby
85