Removing Pc Cards - Toshiba 1100-S101 User Manual

To insert a PC Card:
1 Turn off the computer.
You may also hot swap a PC Card. Stop the PC Card by
clicking the Safely Remove Hardware icon on the System
tray. After the Safe to Remove Hardware message appears, it
is safe to remove the PC Card.
2 Align the card connectors with an available PC Card slot
and carefully slide the card into the slot until it locks into
place.
NOTE: If you have a Type III card, insert the connector into the
lower slot. If you have a Type I or Type II card, you can insert it into
either the upper or the lower slot.
There are two eject buttons, one per slot.
CAUTION: To avoid damaging the PC Card or the computer, don't
force the card into the PC Card slot.

Removing PC Cards

1 Stop the PC Card by clicking the Safely Remove Hardware
icon on the System tray.
After the Safe to Remove Hardware message appears, it is
safe to remove the PC Card.
2 To remove the PC Card, press the slot's eject button once.
3 Remove the PC Card and store it properly.
Exploring Your Options
Using PC Cards
151