Table of Contents
Advertisement
188
If Something Goes Wrong
Resolving a hardware conflict
Memory card problems
Incorrectly connected or faulty memory modules may cause
errors that seem to be device-related. It is worthwhile
checking for these first:
1
Turn off the computer via the Start menu.
2
Remove the memory module.
3
Reinstall the memory module, following the instructions
in
making sure it is seated properly.
4
Check for the error again.
5
If the error recurs, remove the memory module entirely
and check for the error again.
If removing the memory module eliminates the error, the
memory module may be faulty. If the error recurs without
the memory module installed, the error is not caused by
the memory module.
NOTE: Toshiba recommends using only memory approved by
Toshiba.
Power and the batteries
Your computer receives its power through the AC adapter and
power cable or from the system batteries (main battery and
optional secondary battery). Power problems are interrelated.
For example, a faulty AC adapter or power cable will neither
power the computer nor recharge the batteries.
Here are some typical problems and how to solve them:
The AC power light does not come on when you plug in
the AC adapter and power cable.
Make sure the AC adapter and power cable are firmly
plugged into both the wall outlet and the computer.
"Using the computer for the first time" on page
44, and
Advertisement
Table of Contents
