Toshiba 1100-S101 User Manual page 196

196
If Something Goes Wrong
Resolving a hardware conflict
may impact the playback performance of the WinDVD
player.
WinDVD controls are disabled.
Controls may be grayed out by commands on the DVD. For
example, it is common for DVD movie titles to disable fast-
forward and rewind during the legal notices at the beginning
of a movie.
Playback performance is poor.
The use of DMA dramatically increases the DVD playback
performance of your system.
To make sure DMA is turned on and to check its settings:
1 Click Start, then Control Panel.
2 Click the Performance and Maintenance icon, then
click the System icon.
3 Click Hardware tab, then the Device Manager button.
4 Double-click IDE ATA/ATAPI controllers to expand it,
then double-click Secondary IDE Channel.
The Properties Box appears.
5 Select the Advanced Settings tab, then select DMA if
available from the Transfer Modes drop-down list. In
the correct device area, click OK.
6 The system must be restarted for this setting to take
effect.
The Root or Title menu does not open.
Most DVD titles have one or both of the "Root" and "Title"
menus. If one menu button appears to do nothing, try the
other menu button.
WinDVD performance decreases after making a system
change.
DVD playback performance is dependent upon several
system resources. Changes to these system resources caused,