Troubleshooting - Klarstein Vivo Vino 26 Manual

Problem
Wine cooler does not operate.
Temperature inside the wine
cooler is too warm.
Temperature inside the wine
cooler is too cold.
Vibrations.
Moisture forms on inside wine
cooler walls.
Moisture forms on outside of
appliance.
The door will not close properly.

Troubleshooting

Possible cause
Not plugged in.
The circuit breaker tripped or a blown
fuse.
Temperature control is set too warm.
Door is kept open too long or is opened
too frequently.
Warm air enters the wine cooler every
time the door is opened. The door is
not closed completely.
The door gasket does not seal properly.
The wine cooler has recently been
disconnected for a period of time.
Temperature control is set too cold.
The wine cooler is touching the wall.
Door is slightly open.
Door is kept open too long, or is ope-
ned too frequently.
Door is slightly open, causing cold air
from inside the wine cooler to meet
warm moist air from outside.
The wine cooler is not on a level
surface.
The gasket is dirty..
Solution
Check the plug and the fuses.
Turn the control to a cooler setting
and allow several hours for the tem-
perature to stabilize.
Open the door less often.
4 hours are required for the wine
cooler to cool down completely.
Turn the control to a warmer setting
and allow several hours for the tem-
perature to stabilize.
Check to assure that the wine cooler
is on a level surface.
Re-level the wine cooler and move it
from the wall.
If continued vibration occurs, turn off
the wine cooler and unplug the power
plug. Contact Customer Service Dept.
for further assistance.
Open the door less often.
.
Close the door properly.
Move the device on a level surface.
Clean the gasket.
20