Troubleshooting - Klarstein VINSIDER 30 UNO Manual

TROUBLESHOOTING

Problem Possible cause and solution
The It is not plugged in.
appliance is
It is switched off.
not working.
The fuse is out or blown.
The Check the temperature settings.
appliance
The environment requires a lower setting.
is not cold
The door was opened too often.
enough.
The door is not closed properly.
The door seal does not seal properly.
The light The appliance is not plugged in.
doesn't
The fuse is out or blown.
work.
The LED light is broken.
The light switch is set to "off".
The The room temperature is higher than usual.
appliance
There are many bottles in the appliance.
goes on
The door was opened too often.
and off
frequently.
The door is not closed properly.
The temperature is not set correctly.
The door seal does not seal properly.
Vibrations Check if the appliance is level.
The The coolant is circulating. Noises that occur as a direct result of
appliance is this are not a defect, but normal.
very loud.
After each cooling cycle, you hear a gurgling sound because
there is still coolant in circulation.
The contraction and expansion of the inner walls can cause
cracking.
The appliance is not level.
EN
33