Breaking A Raid-0 Array (Striping) - Toshiba Qosmio G35-AV660 Series User Manual

246
Using the TOSHIBA RAID Utility
TOSHIBA RAID Console Utility
3 Click Media Check.
The Confirm media check window appears.
(Sample Image) Confirm media check window
4 Click OK.
The time required to complete a media check can vary
depending on the amount of data to be checked.
You may use the computer while performing a media check;
however, the computer's performance may be slower than
usual.

Breaking a RAID-0 array (striping)

If you want to permanently stop using the secondary internal
hard disk drive for RAID-0, you must reinstall the Windows
operating system from the Toshiba Recovery DVD that
shipped with your system.
Before breaking the RAID-0 array, make sure you back up all
data on your computer's hard drives onto another storage
media. When a RAID-0 array is broken, all data on both your
primary and secondary hard disks is erased and cannot be
recovered. Toshiba is not responsible for any loss of data on
your hard disks.