Toshiba Qosmio G35-AV660 Series User Manual page 60

60
Getting Started
Adding memory (optional)
9 Carefully remove the new memory module from its
antistatic packaging, without touching its connector.
10 Locate an empty memory module slot on the underside of
the computer.
NOTE
NOTE
11 Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector's notch with the
matching key in the socket.
notch
latch
key
(Sample Illustration) Aligning the memory module with the socket
If no memory slot is available, you must remove a module by
performing steps
page 63.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
2-3 of "Removing a memory module" on
connector
latch