Toshiba Qosmio G35-AV660 Series User Manual page 235

4 Press the right arrow key until the CD icon is highlighted;
then, press Enter.
The following menu is displayed:
Your machine supports Redundant Array of Independent Disks
(RAID). Please select the RAID level.
1. Factory Default
Setup the computer ready to support mirroring function.
You can use RAID Utility to configure two hard disks to
become mirror of each other, in which the same data is
written on both hard disks. If one hard disk fails, the
system can still run from the other hard disk. Before using
RAID Utility, your second hard disk can still work as
independent hard disk.
Advance Setting (for Advance users only)
2. RAID-1 - Automatically configure two hard disks of your
computer to become mirror after recovery process is
completed.
WARNING: You can not use the second hard disk for any
other purpose until you use RAID Utility to end mirroring.
3. RAID-0 - Automatically configure computer to support
striping function - data is broken into blocks and written
to both hard disks simultaneously to increase the hard disk
performance.
WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST.
Enter selection:"
(Sample Image) Toshiba Recovery DVD RAID Menu
5 Press 3 and then press Enter to select RAID-0.
RAID-1 configuration can vary in time to complete, depending
NOTE
on the size of the hard drives and the amount of data.
Using the TOSHIBA RAID Utility
Creating a new RAID-0 array
235