Check Of The Raid Configuration; Explanation Of The Screen Display - Toshiba QOSMIO G30 Maintenance Manual

3 Tests and Diagnostics
3.3

Check of the RAID configuration

Following screen is displayed for checking the RAID configuration and specifying a failed
drive.
TOSHIBA RAID / RAID Information Display Rev xx.xx.xxxx
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-1 DEGRADE xxGB
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assign
0 LD0-0
1 LD0-1
< RAID: not OPTIMAL >

3.3.1 Explanation of the screen display

Contents of the screen display are shown below.
Level Status
LD0 RAID-1
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assign
0 LD0-0
1 LD0-1
< RAID: not OPTIMAL >
RAID level
3-8 [CONFIDENTIAL]
Status Capacity
: Enable
: Yes
: Disable
: Enable
Status Size Model
ONLINE xxGB xxxxxxx-------------- xxxxxxx
FAILED xxGB xxxxxxx-------------- xxxxxxx
Capacity
DEGRADE xxGB
: Enable
: Yes
: Disable
: Enable
Status Size Model
ONLINE xxGB xxxxxxx--------------
FAILED xxGB xxxxxxx--------------
3.3 Check of the RAID configuration
Logical Drive
information
Physical Drive
information
QOSMIO G30 Maintenance Manual (960-546)
Rev
Rev
xxxxxxx
xxxxxxx