Inserting Batteries - LaserLiner SuperSquare-Laser 2G Manual

– Reflective, specular or shiny surfaces must be covered whilst
laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
1

Inserting batteries

Open the battery compartment (8)
and insert batteries according
to the symbols. Be sure to pay
attention to polarity.
7
8
1 ON / OFF switch
2 Vials for wall applications
3 Laser output windows
4 90° try-square edge
08
EN
7
6
2
5 Contact surface
6 Lay edge
7 Pins
8 Battery compartment
–
–
1
2
3
5
3
4
5