Ti-84 Plus Mode Cables - Texas Instruments TI-Nspire Getting Started

4. Insert the other
keypad.
Ensure that it fits
comfortably into the
guides on the bottom
and sides of the
handheld.
The keypad does
Note:
not slide in from the
bottom edge of the
handheld. Instead, fit it
into the guides just above
the batteries.
5. When the keypad is
properly seated on
the handheld, push
the keypad toward
the display screen.
The keypad clicks
into place when
properly seated and
completely inserted
into the handheld.

TI-84 Plus Mode Cables

If you already have TI-84 Plus handhelds and use the I/O port for connectivity,
use the same cables to connect to a TI-Nspire™ handheld using the TI-84
keypad.
Working in TI-84 Mode 127