Ti-84 Plus Mode Cables - Texas Instruments TI-nspire Getting Started

2. Turn the handheld top side up, and slide the
keypad away from the display screen.
3. Lift the keypad off the handheld.
4. Insert the other keypad.
Ensure that it fits comfortably into the guides on
the bottom and sides of the handheld.
The keypad does not slide in from the bottom
Note:
edge of the handheld. Instead, fit it into the guides
just above the batteries.
5. When the keypad is properly seated on the
handheld, push the keypad toward the display
screen.
The keypad clicks into place when properly
seated and completely inserted into the
handheld.

TI-84 Plus Mode Cables

If you already have TI-84 Plus handhelds and use the I/O port for connectivity,
use the same cables to connect to a TI-Nspire™ handheld using the TI-84
keypad.
116 Working in TI-84 Mode