Upgrading The Os On Multiple Handhelds; Os Upgrade Messages - Texas Instruments TI-Nspire Getting Started

8. When the installation is complete, the " OS <version number> has been
installed. Handheld will now restart. " message is displayed. The restart is
initiated. If the sending handheld is still attached to the cable, the
successful transmission message remains displayed on that handheld's
screen.
Important:
• For each receiving handheld, remember to back up information as
necessary and install new batteries.
• Be sure the sending handheld is on the Send OS screen.

Upgrading the OS on Multiple Handhelds

In the classroom, use the TI-Nspire™ Docking Station to upgrade the OS on
multiple handhelds at the same time.
In the teacher versions of the TI-Nspire™ software, you can transfer files from
the computer to multiple handhelds from the Content Workspace. See Using
the Content Workspace for more information about transferring files to
connected handhelds.

OS Upgrade Messages

This section lists the information and error messages that can be displayed on
handhelds during an OS Upgrade.
Shown
on:
Sending
handheld
Sending
handheld
122 Updating the Handheld Operating System
Message and Description
"Receiver does not have enough storage space. Make
This message indicates that the receiving handheld does not
have enough memory available for the new OS. The space
requirement is shown so you know how much memory must
be cleared for the new operating system. Files can be moved
to a computer for storage to free the necessary space.
"Receiver must change batteries before upgrading the
<xxxK> available."
OS."