Texas Instruments TI-Nspire Getting Started page 107

Shown Message and Description
on
Sending "<folder>/<filename> transferred as <folder>/<filename
handheld
This message is displayed at the end of a successful transfer
when the file had to be renamed because a file already exists
on the receiving handheld with the original name. The
transmitted file is renamed by appending a number to the end
of the name. Rename numbering always begins with (2) and
can increment by one, as needed.
Sending
handheld
This message indicates that a new folder was created on the
receiving handheld to contain the transmitted document.
Receiving
handheld
This message indicates that the receiving handheld has a
document with the same name as the document being sent.
Receiving
handheld
This message indicates that a new folder has been created to
contain the transmitted document.
Receiving
handheld
This message indicates that the cable is not correctly attached
to the receiving handheld's link port. Remove the cable then
reattach it and try the transmission again.
Click OK to cancel the transmission message.
"<folder>/<filename> transferred as <folder>/<new
"<folder>/<filename(x)> received."
"<new folder>/<new filename> received."
"Transfer failed. Check cable and try again."
(#)."
filename>."
OK
Connecting Handhelds and Transferring Files 107