Oriental motor OPX-2A Operating Manual
Hide thumbs
Also See for OPX-2A:
- Operating manual (44 pages) ,
- Quick start manual (8 pages) ,
- User manual (212 pages)
Table of Contents
Advertisement
Quick Links
Data Setter
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
OPX-2A
Before Use
Table of contents
1 Safety precautions..............................2
2 Introduction.........................................3
3 Preparation.........................................5
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
OPX-2A ............................................10
4.1
4.2
4.3
Checking the product..............................5
Names and functions of parts .................5
How to read the display ..........................6
How to read the LED indicators ..............6
Types of modes ......................................7
Edit lock function.....................................7
Basic operations of the OPX-2A .............8
Rewriting the data...................................9
Location for installation ......................... 10
Installation method................................10
Connection method............................... 11
HM-40142
Advertisement
Table of Contents
Related Manuals for Oriental motor OPX-2A
Summary of Contents for Oriental motor OPX-2A
-
Page 1: Table Of Contents
HM-40142 OPX-2A Data Setter Before Use OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures and safety precautions. • Please read it thoroughly to ensure safe operation. • Always keep the manual where it is readily available. -
Page 2: Safety Precautions
Use the product only after carefully reading and fully understanding these instructions. Also read the “Safety precautions” sections in the operating manuals that came with the product you are combining with the OPX-2A. Handling the product without observing the instructions that accompany a Warning “Warning”... -
Page 3: Introduction
The OPX-2A comes with the manuals specified below. • OPERATING MANUAL Before Use (this document) Names and functions of parts of the OPX-2A, how to read the display area, overview of basic operations, and installation and connection, are explained, among others. - Page 4 Mass 0.25 kg (8.8 oz) Applicable product Refer to “Information” (HM-40108) for the products that can be used in combination with the OPX-2A. These products are referred to as an “applicable product” in this document. Hazardous substances RoHS (Directive 2002/95/EC 27Jan.2003) compliant...
-
Page 5: Preparation
3 Preparation Preparation This chapter explains the items you should know before using the OPX-2A. 3.1 Checking the product Verify that the items listed below are included. Report any missing or damaged items to the branch or sales office from which you purchased the product. -
Page 6: How To Read The Display
3 Preparation 3.3 How to read the display The display consists of 7-segment LEDs. (The number “5” and alphabet “S” are the same.) Numbers Alphabet Signs 3.4 How to read the LED indicators When the operation mode is changed or an alarm or warning generates, a corresponding LED will be lit. While the motor is operating or the edit lock function is enabled, the condition is also indicated by the illumination of a corresponding LED. -
Page 7: Types Of Modes
3 Preparation 3.5 Types of modes The OPX-2A has multiple modes. The mode will change every time the key is pressed. The display starts in the monitor mode when the power is turned on. Modes that can be selected vary depending on the applicable product. -
Page 8: Basic Operations Of The Opx-2A
This is the basic operation flow. key on the OPX-2A is pressed while internal processing is being If the Note performed, the top screen will not change to any of its sub-screens and “mEm-bUSY”... -
Page 9: Rewriting The Data
The saved data is rewritten when certain operations, such as those listed below, are performed (the specific operations vary depending on the applicable product): • Change any operating data or parameter • Download data from the OPX-2A to the applicable product • Initialize operating data and parameters • Preset the current position •... -
Page 10: Installation And Connection Of The Opx-2A
• 1000 m (3300 ft.) or less above sea level 4.2 Installation method Using a metal plate of 1 to 3 mm (0.04 to 0.12 in.) in thickness, insert the OPX-2A into the mounting hole from the front side and securely affix the OPX-2A. -
Page 11: Connection Method
OPX-2A. In this condition, press the OPX-2A forward to release. 4.3 Connection method Plug the connector attached to the end of the OPX-2A cable into the communication connector on the applicable product, and then turn on the power to the applicable product. Applicable product... - Page 12 If a new copy is required to replace an original manual that has been damaged or lost, please contact your nearest Oriental Motor branch or sales office. • Oriental Motor shall not be liable whatsoever for any problems relating to industrial property rights arising from use of any information, circuit, equipment or device provided or referenced in this manual.