Performing A Blood Glucose Test - Fora G20 Owner's Manual

Performing a Blood Glucose Test

1. Insert the test strip to turn on the meter
Wait for the meter to display " ".
2. Select the appropriate measuring mode by pressing Main button
For selecting the measurement mode, please refer to "THE TWO
MEASURING MODES".
If the confirmation window is not filled completely before the meter
begins to count down, do not add more blood to the test strip. Discard
the test strip and start again. If you have trouble filling the test strip,
please call your local customer service number for assistance.
NOTE:
 If you do not apply a blood sample within 3 minutes, the meter will
automatically turn off. You must remove the test strip and insert it back into
the meter to restart the test.
3. Apply blood sample
Obtain a drop of blood of at least 0.7 μL
with a lancing device. When the " "
symbol appears on the display, touch
the drop of blood with the absorbent
hole of the test strip. Do not rub the test
strip with your finger or try to apply a
smeared sample.
Gently apply the drop of blood to the
absorbent hole of the test strip at a
tilted angle. Confirmation window should
be completely filled if enough blood
sample has been applied. Do NOT
remove your finger until you hear a beep
sound.
19