Price Lookup (Plu) Programming; Unit Price - Sharp ER-A420 Instruction Manual

FOR THE MANAGER-1-A410/A420
• Registration type (SICS/SIF/Normal type)
SICS: If the first registration is to a department set for SICS, the sale is finalized as soon as the department
key is pressed. If the sale is preceded by registrations to departments not set for SICS, a sale to a
department set for SICS does not finalize and can be repeated until the
SIF: Whenever a sale is made to a department set for SIF, the sale is finalized as soon as the department
key is pressed.
• Type of unit price entry (open and preset/preset only/open only/inhibit department key)
You may select one of four types of unit price entry for each department.
• HALO (High Amount Lockout)
You can set upper limit amounts for each department. The limit is effective for operations in the REG mode
and can be overridden in the MGR mode. HALO limit is represented by two figures as follows. Programmed
item (H and l) is the same as H x 10
• Commission group number
A commission group number (0 - 9, 0: non commission) can be assigned to each department.
• Group number
You can assign departments to a maximum of 14 groups (1 through 14, 0: non group).
Example
3

Price lookup (PLU) programming

Your machine is equipped with 500 standard PLUs. Your machine allows you to perform the following
programming for each PLU.

Unit price

Procedure
l Ò
PLU code (max. 6 digits)
02.4.20 6:48 PM Page 23
I
.
Key operation
≈ 1
000000317001
;
PGM 1 PGM 2
To program for another PLU
To program zero
Direct PLU key
(max. 6 digits)
P
To program zero
:
Unit price 1
To program for the following PLU
;
key is pressed.
Print
:
Unit price 2
(max. 6 digits)
;
23