Clerk Report - Sharp ER-A420 Instruction Manual

FOR THE MANAGER-2-A410/A420

Clerk report

Using this function, you can take X and Z reports for individual clerks or all clerks.
Individual clerk reading and resetting
The OP X/Z-mode reading and resetting is allowed only when your machine has been programmed
Note
for "OP X/Z mode available" in the PGM2 mode.
• Sample X report
Full clerk reading and resetting
The subsequent printout occurs in the same format as
in the reports of individual clerk reading and resetting,
and sales data for clerks print in this sequence.
* When you take these reports in the OP X/Z mode, the X report shows an "OP X" and the Z report shows an
"OP Z".
104
02.4.20 6:49 PM Page 104
• Sample Z report
Clerk no./clerk code
Clerk name
Order total
(Net sales total)
Commission 1
(sales total)
Commission 1
(amount)
Commission amount total
Non-commission sales
The subsequent printout occurs in the
same format as in the sample X report.