Cabling - IBM eServer xSeries 440 Quick Reference

Cabling

For additional cabling information, see "Cabling" on page 18.
Ensure retention of main power cables
Description: When sliding the server in and out of the rack enclosure, the power cords might
loosen or detach from the server.
Solution:
plate (as stated in step 13 of the
around the power cords and the cable-management arm, directly behind the hinge
that connects the arm to the hinge plate.
For more information: See Tip H76202 at http://www.ibm.com/pc/support/.
Scalability cables difficult to install and remove
Description: The EMC shield (scalability bracket) on some xSeries 440 servers is not
recessed enough, and this makes it is very difficult to install and remove the scalability cables.
(For additional information about connecting the scalability cables, see "Cabling" on page 18.)
Solution: Obtain the replacement EMC shield. For assistance in obtaining the replacement
EMC shield:
•
•
A new Miscellaneous Parts Kit that includes the replacement EMC shield (24P1240) will be
available in September, 2002.
For more information: See Tip H081720 at http://www.ibm.com/pc/support/.
4
Hints, Tips, and Frequently Asked Questions for the xSeries 440:Quick Reference
In addition to the cable strap used to secure the power cords to the hinge
In the United States and Canada, call 1-800-772-2227 and ask for FRU part number
24P1240.
In all other countries, go to http://www.ibm.com/planetwide/ to view a list of the most
current support telephone numbers; then, call the support line for your country or region
and ask for FRU part number 24P1240.
Rack Installation Instructions
), install a cable strap