Laser Information - Sharp MX-M502N Start Manual

Laser information

Wave length
Pulse times
(North America and Europe)
Output power
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that
the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The equipment's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges
or other items into switch slots.
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED SERVICE REPRESENTATIVE FOR ASSISTANCE IN
DISPOSING OF THIS BATTERY.
Each instruction also covers the optional units used with these products.
790 nm ± 10 nm
MX-M282N/MX-M362N: 11.9 µs ± 33.0 ns /7 mm
MX-M452N/MX-M502N: 9.4 µs ± 25.6 ns /7 mm
Max 0.6 mW (LD1+ LD2)
SAFETY PRECAUTIONS
"BATTERY DISPOSAL"
CAUTIONS
7