Laser Information; Battery Disposal - Sharp MX-2610N Quick Start Manual

SPECIFICATIONS
Basic Specifications / Copier specifications
Name MX-2610N/MX-3110N/MX-3610N
Type Desktop
Colour Full colour
Copier system Laser electrostatic copier
Scan (B/W): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
Scanning
Scan (full colour): 600 × 600 dpi
resolution
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper
Max. A3 (11" x 17") for sheets and bound documents
sizes
A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency film, Heavy paper, Envelopes
Tray 1-4: A3, B4, A4, A4R, B5, B5R, A5R, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-1/2", 8-1/2" × 13-2/5",
8-1/2" × 13", 8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R, 5-1/2" × 8-1/2"R
Multi-bypass tray: A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency film, Heavy paper,
Copy sizes Envelopes
Lost margin (leading edge): 4 mm (11/64") ± 1 mm (± 3/64")
Lost margin: (trailing edge): 2 mm (6/64") - 5 mm (- 13/64")
Leading edge / trailing edge: total 8 mm (21/64") or less
Near edge / far edge: total 4 mm (11/64") ± 2 mm (± 6/64") or less
20 seconds or less
Warm-up time
 This may vary depending on the ambient conditions.
MX-2610N
Full colour: 8.1 seconds
First-copy time
B/W: 5.9 seconds
 This may vary depending on the state of the machine.
A4, 8-1/2" × 11" B5, 7-1/4" × 10-1/2"
Continuous
A4R, 8-1/2" × 11"R B5R, 7-1/4" × 10-1/2"R 19 copies/min.
copying speeds*
B4, 8-1/2" × 14"
(when shifter is
A3, 11" × 17"
not in operation)
* Continuous speed for same original source. Output may be
temporarily interrupted to stabilize image quality.
18
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that
will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.
The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be
possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.

Laser information

Wave length 790 nm ± 10 nm
Normal paper mode (P/S = 104 mm/s) = (5.15 µs ± 0.03 ns) / 7 mm
Pulse times
Heavy paper mode (P/S = 70 mm/s) = (3.83 µs ± 0.03 ns) / 7 mm
Output power Max 0.405 mW
„ Caution
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition
2-2007)
MX-3110N MX-3610N
7.9 seconds 6.8 seconds
5.8 seconds 5.2 seconds
MX-2610N MX-3110N MX-3610N
26 copies/min. 31 copies/min. 36 copies/min.
20 copies/min. 23 copies/min.
16 copies/min. 17 copies/min. 20 copies/min.
14 copies/min. 15 copies/min. 17 copies/min.
CAUTION
Same size: 1:1 ± 0.8 %
Copy ratios
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments, total
376 increments. Can calculate zoom rate when mm is specified.
500 sheets in one tray plus 100-sheet multi-bypass tray
Paper feed / capacity
 Using 80 g/m
5,600 sheets in 4 trays (500 × 4) plus 100-sheet multi-bypass tray plus 3,500
Max. paper feed / max. capacity sheets in large capacity tray
 Using 80 g/m
Continuous copy Max. 999 copies
Standard: 2 GB HDD: 160 GB SD card
Memory  1 GB = One billion bytes when referring to hard drive capacity. Actual format
capacity is less.
Operating
10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1,013 hpa
environment
Ambient
environment
Standard
20 °C (68 °F) to 25 °C (77 °F) (65 ± 5 % RH)
environment
Local voltage ± 10 % (For the power supply requirements, see the name plate
Required power supply in the lower corner of the left side of the machine.)
Power consumption Max. 1.44 kW (including options such as the desk)
MX-2610N/MX-3110N
583 mm (W) × 658 mm (D) × 834 mm (H)
(22-61/64" (W) × 25-29/32" (D) × 32-27/32" (H))
Dimensions
MX-3610N
608 mm (W) × 680 mm (D) × 834 mm (H)
(24-5/16" (W) × 26-25/32" (D) × 32-27/32" (H))
MX-2610N/MX-3110N
Weight
Approx. 75 kg (165 lbs.)
MX-2610N/MX-3110N
850 mm (W) × 658 mm (D) (33-15/32" (W) × 25-29/32" (D))
With multi-bypass
tray extended MX-3610N
876 mm (W) × 680 mm (D) (34-31/64" (W) × 26-25/32" (D))
Overall
dimensions
MX-2610N/MX-3110N
963 mm (W) × 658 mm (D) (37-59/64" (W) × 25-29/32" (D))
With right side exit
tray extended MX-3610N
1,015 mm (W) × 680 mm (D) (39-31/32" (W) × 26-25/32" (D))
The fusing unit and paper exit area are hot. When removing a
misfeed, do not touch the fusing unit and paper exit area. Take care
not to burn yourself.
When loading paper, removing a misfeed, performing
maintenance, closing the front and side covers, and
inserting and removing trays, take care that your fingers
are not pinched.
„ "BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP
BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS
BATTERY.
Enlarge: 115 %, 122 %, 141 %, 200 %, 400 %
Reduce: 25 %, 50 %, 70 %, 81 %, 86 %
2 (21 lbs.) weight paper
(21 lbs.) weight paper
2
4 GB PCL accelerator 1 GB
MX-3610N
Approx. 78 kg (171 lbs.)
11