Laser Information - Sharp MX-M623N Start Manual

Back
CAUTIONS

Laser information

Wave length
Pulse times
(North America and Europe)
Output power
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that
the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The equipment's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges
or other items into switch slots.
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR ASSISTANCE IN
DISPOSING OF THIS BATTERY.
This product utilizes a CR coin Lithium battery which contains a Perchlorate material. Special handling for this material may apply,
California residents, See www.dtsc.ca.gov/hazardouswaste/perchlorate/
Others, consult local environmental officers.
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be
regulated due to environmental consideration. For disposal or recycling information, please contact your local authorities, the
Electronics Industries Alliance: www.eiae.org, the lamp recycling organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP.
(For U.S.A. Only)
6
790 nm ± 10 nm
MX-M623N/MX-M623U: 3.3 µs ± 6.4 ns /7 mm
MX-M753N/MX-M753U (Heavy paper mode): 3.3 µs ± 6.4 ns /7 mm
MX-M753N/MX-M753U (Standard mode): 2.8 µs ± 5.4 ns /7 mm
Max 0.5 mW (LD1+ LD2)
SAFETY PRECAUTIONS
"BATTERY DISPOSAL"