Setup In A Windows Environment; Opening The Software Selection Screen (For All Software) - Sharp MX-M502N Start Manual

SETUP IN A WINDOWS ENVIRONMENT

This section explains how to install the software on a Windows computer. For more details regarding installation
procedures and instructions for installation in Macintosh environments, see Chapter 1 of the Operation Guide.
OPENING THE SOFTWARE SELECTION SCREEN (FOR
ALL SOFTWARE)
1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
• If you are installing the printer driver or printer status
monitor, insert the "Software CD-ROM" that shows
"Disc 1" on the front of the CD-ROM.
• If you are installing the PC-Fax driver or scanner
driver, insert the "Software CD-ROM" that shows
"Disc 2" on the front of the CD-ROM.
2
Click the [Start] button (
[Computer], and then double-click the
[CD-ROM] icon (
• In Windows XP/Server 2003, click the [start] button,
click [My Computer], and then double-click the
[CD-ROM] icon.
• In Windows 2000, double-click [My Computer] and
then double-click the [CD-ROM] icon.
3
Double-click the [Setup] icon (
In Windows 7, if a message screen appears asking you
for confirmation, click [Yes].
In Windows Vista/Server 2008, if a message screen
appears asking you for confirmation, click [Allow].
4
The "SOFTWARE LICENCE" window
will appear. Make sure that you
understand the contents of the licence
agreement and then click the [Yes]
button.
You can show the "SOFTWARE LICENCE" in a
different language by selecting the desired language
from the language menu. To install the software in the
selected language, continue the installation with that
language selected.
30
), click
).
).
5
Read the message in the "Welcome"
window and then click the [Next] button.
6
The software selection screen appears.
Before installing the software, be sure to click the
[Display Readme] button and view the detailed
information on the software.
* The above screen appears when using the
"Disc 1" CD-ROM.
For the steps that follow, see the appropriate page below
for the software that you are installing.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
• WHEN THE MACHINE IS CONNECTED TO A
*
NETWORK
- Standard installation: page 31
- Installation by specifying the machine's address:
page 1-84 in the Operation Guide
- Printing using the IPP function and the SSL function:
page 1-87 in the Operation Guide
• WHEN THE MACHINE WILL BE CONNECTED WITH A
USB CABLE: page 1-89 in the Operation Guide
• USING THE MACHINE AS A SHARED PRINTER:
page 1-94 in the Operation Guide
INSTALLING THE PRINTER STATUS MONITOR:
page 1-99 in the Operation Guide
INSTALLING THE SCANNER DRIVER: page 1-100 in the
Operation Guide
*
If the machine is being used on an IPv6 network, see
"Installation by specifying the machine's address" (page
1-84 in the Operation Guide).