Installing The Printer Driver / Pc-Fax - Sharp MX-M502N Start Manual

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this section depending on whether
the machine is connected to a network or connected by USB cable.
☞
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 1-89 in the Operation Guide)
WHEN THE MACHINE IS CONNECTED TO A NETWORK
This section explains how to install the printer driver and the PC-Fax driver when the machine is connected to a
Windows network (TCP/IP network).
• The PS3 expansion kit is required to use the PS printer driver or the PPD driver.
• To print to the machine over the Internet using the IPP function when the machine is installed in a remote location, or to
print using the SSL (encrypted communication) function, see "Printing using the IPP function and the SSL function" (page
1-87 in the Operation Guide) and install the printer driver or the PC-Fax driver.
• If the machine is connected to an IPv6-only network
The software cannot be installed by detecting the machine's address from the installer. After installing the software as
explained in "Installation by specifying the machine's address" (page 1-84 in the Operation Guide), change the port as
explained in "Changing to a Standard TCP/IP Port" (page 1-105 in the Operation Guide).
• The installation procedure in this section is for both the printer driver and the PC-Fax driver, although the explanations are
centred on the printer driver.
 Standard installation
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR
ALL SOFTWARE)" (page 30), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax Driver]
button on the "Disc 2" CD-ROM.
*The above screen appears when using the "Disc 1" CD-ROM.
SETUP IN A WINDOWS ENVIRONMENT
31