Advertisement
Assign phone numbers to each VoIP location
You can now assign phone numbers to locations in your VoIP network.
Each TalkSwitch unit with VoIP lines can support up to 12 VoIP phone numbers.
Unique call handling scenarios can be configured for each VoIP number. VoIP
phone numbers can be 3 or more digits in length.
TalkSwitch supports 50 VoIP location numbers (250 to 299) that permit direct
dialing from any extension or Auto Attendant in the network. If needed, numbers
outside of this range can also be added — see TalkSwitch User Guide for details. Each
VoIP phone number assigned in a multi-location network must be unique (i.e. only
used for one location).
For VoIP calls made through a VoIP service provider, the service provider will
assign the VoIP numbers to be used for their service.
To assist in assigning VoIP numbers for your network, use Appendix A — VoIP
Network Administration Form at the end of this guide.
Assigning VoIP phone numbers in your TalkSwitch configuration is described in
STEP 4 of this guide — Assign VoIP Phone Numbers.
6
Example: Continuing with the previous example, five VoIP location numbers
are assigned to VoIP lines in London (251 to 255), nine are assigned to VoIP
lines in Sydney (261 to 269), and one is assigned to the teleworker office
in Pretoria (271). These phone numbers can be dialed directly from an
extension or from an Auto Attendant from any location within the network.
TalkSwitch network configuration
FIGURE 3.
TALKSWITCH VOIP NETWORK CONFIGURATION GUIDE
Advertisement
