Advertisement
Quick Links
The 8180 requires the information below:
SIP Domain/Proxy,
Ring Detect Extension or/and Page Audio Extension, (The 8180 needs its own phone extension)
Authentication ID,
Password,
Get TalkSwitch SIP Domain/Proxy:
1) If your TalkSwitch act as a SIP Server (See page 9) then "SIP Domain/Proxy" = TalkSwitch local IP
address (see page 7)
2) If your TakSwitch as to register with the TalkSwitch SIP Server (see page 10) then "SIP Domain/Proxy" =
TalkSwitch SIP Server public IP address (see page 8)
Get Authentification ID and Password
1) If Authentification has been enabled you need the User/Account name and password for the TalkSwitch
SIP Server (See page 9 point 5)
Get a Ring or/and Page extension (note that if you set Ring and Page on the 8180 the extension have to be
different)
1) To assign a VoIP phone number see page 12.
Advertisement
Summary of Contents for Talkswitch 240
- Page 1 Password, Get TalkSwitch SIP Domain/Proxy: 1) If your TalkSwitch act as a SIP Server (See page 9) then "SIP Domain/Proxy" = TalkSwitch local IP address (see page 7) 2) If your TakSwitch as to register with the TalkSwitch SIP Server (see page 10) then "SIP Domain/Proxy" =...
- Page 2 TALKSWITCH DOCUMENTATION VoIPNETWORK CONFIGURATION GUIDE RELEASE4.0 CT.TS005.00330 2.IA ® A NS W E RS WI TH I NTELLI GENCE...
- Page 3 INTRODUCTION About this guide This guide is designed to help you plan and configure a TalkSwitch Voice over IP (VoIP) network. Note: For TalkSwitch provisioning with a VoIP service provider, please refer to the documentation located on our website. Visit http://global.talkswitch.com and select country or region.
- Page 4 Ensure the TalkSwitch or gateway is connected to a Local Area Network (LAN), equipped with an Ethernet switch and router, or a router with an integrated switch. A PC should be connected to the LAN, for configuring the TalkSwitch, as well as the router and/or switch.
- Page 5 To allow SIP Signaling data to be forwarded to TalkSwitch, firewall port 5060 • must be mapped to the TalkSwitch unit known as the Local Proxy. By default, this is the lowest numbered TalkSwitch on a LAN. The IP Configuration window of the TalkSwitch software indicates with an asterix which TalkSwitch unit is the Local Proxy (see example on page 7).
- Page 6 Multi-location network with VoIP calling FIGURE 2. 1The Mediatrix 2102 is a TalkSwitch-certified third-party SIP gateway that is ideal for small branch offices or teleworkers. 2Up to 48 VoIP numbers can be assigned to the 16 VoIP lines. TALKSWITCH VOIP NETWORK CONFIGURATION GUIDE...
- Page 7 One DDNS provider is DynDNS; visit: http://www.dyndns.org/services/dns/dyndns for more information. Configuring TalkSwitch to act as the SIP server is described in STEP 2 of this guide — Configure TalkSwitch to act as the SIP Server. Example: Building on the previous example, the TalkSwitch system in the London office is designated as the SIP server —...
- Page 8 Auto Attendant in the network. If needed, numbers outside of this range can also be added — see TalkSwitch User Guide for details. Each VoIP phone number assigned in a multi-location network must be unique (i.e. only used for one location).
- Page 9 Each TalkSwitch system in a multi-location network must be configured with both local IP and public IP address information. These addresses are used to direct VoIP calls to the appropriate location. Each TalkSwitch unit in a system will have a different local IP address, and share a common public IP address.
- Page 10 SIP server, refer to Select which TalkSwitch to use as the SIP network server on page 5. 2. If this TalkSwitch system will act as the SIP server for a network and has a dynamic Public IP address, enter the Fully Qualified Domain Name (FQDN) associated with the Public IP address.
- Page 11 A multi-location TalkSwitch system requires that one (and only one) unit be configured to act as the SIP server (Redirect Proxy/Registrar). For information on the SIP server, see Select which TalkSwitch to use as the SIP network server on page 5. To configure TalkSwitch to act as the SIP server: 1.
- Page 12 Password in the appropriate fields. These should be the same as that specified for the SIP server. 5. TalkSwitch provides options to reserve or limit the number of VoIP lines used for calls. For details, see next page.
- Page 13 Allocating VoIP lines TalkSwitch offers the flexibility to share VoIP lines with the TalkSwitch network and a Service Provider. One can reserve lines for use with one or the other depending on requirements. To allocate VoIP resources, follow the following steps: 1.
- Page 14 Auto Attendant. Note: Ensure that each number assigned is unique in the network. For each TalkSwitch unit with VoIP lines on the network, you can assign up to 12 VoIP phone numbers, increasing the number of inbound VoIP call handling options available.
- Page 15 (for example, Mode 1). 4. From the drop-down lists, select either: Ring extensions only, Play auto attendant, or Go to voice mailbox. For details, refer to the TalkSwitch User Guide. For Ring extensions only, select the extensions from the list (by default they •...
- Page 16 If you will not be using TalkSwitch with a VoIP Service Provider, proceed to STEP 8. STEP 6 — CONFIGURE TALKSWITCH FOR USE WITH A SERVICE PROVIDER Visit www.talkswitch.com/support to access the Service Configuration Guide for your VoIP Service Provider. The guide provides all necessary information to...
- Page 17 5. Repeat the above steps for VoIP numbers 2-12 as is required. For systems with multiple units, repeat the process for each TalkSwitch unit (click on the tabs labeled TalkSwitch 1, TalkSwitch 2, TalkSwitch 3, and TalkSwitch 4). ...
- Page 18 TalkSwitch folder on your PC. (e.g. \Program Files\TalkSwitch\TalkSwitch Configuration 4.00\LastSavedConfig4.00.tsd) To save TalkSwitch configuration settings as a specific file on your PC, select Save to dialog box. File... from the File menu. Enter the filename and location in the Save As Note: Saving to a specific file does not save the settings to TalkSwitch.
- Page 19 1. In the TalkSwitch System Configuration window, select System Information -> VoIP Configuration from the menu on the left. 2. If this TalkSwitch system is the designated SIP server (Proxy/Registrar), click View Registrar Entries to view which systems are registered with the SIP server.
-
Page 20: Appendix A - Voip Network Administration Form
Location name Equipment VoIP phone number(s) We trust that your TalkSwitch phone system will provide exceptional features, performance and value to your business. Should you have any further questions, please contact your authorized TalkSwitch reseller. If you purchased directly from TalkSwitch, visit http://global.talkswitch.com and select country or region.