Advertisement
STEP 3 — CONFIGURE TALKSWITCH TO REGISTER
To make and receive VoIP calls, TalkSwitch systems must be configured to register
with the system designated as the SIP server. This step describes how to configure
a TalkSwitch system to register with the SIP server.
1. In the TalkSwitch System Configuration window, select System Information ->
2. Enter the Proxy Server Name and Registrar Server Name in the appropriate
3. Leave the Outbound Proxy blank. In the Realm/Domain field, enter a name for
4. If authentication was enabled for the SIP server, then enter the User/Account
5. TalkSwitch provides options to reserve or limit the number of VoIP lines used
10
If using TalkSwitch with a VoIP Service Provider, proceed to STEP 6.
WITH THE TALKSWITCH SIP SERVER
VoIP Configuration from the menu on the left.
fields. These should be the same as those specified for the SIP server.
your network (example: abccompany).
name and system Password in the appropriate fields. These should be the same
as that specified for the SIP server.
for calls. For details, see next page.
TALKSWITCH VOIP NETWORK CONFIGURATION GUIDE
Advertisement
