Advertisement
If using TalkSwitch with a VoIP Service Provider, proceed to STEP 6.
STEP 2 — CONFIGURE TALKSWITCH TO ACT AS THE
SIP SERVER
A multi-location TalkSwitch system requires that one (and only one) unit be
configured to act as the SIP server (Redirect Proxy/Registrar). For information on
the SIP server, see Select which TalkSwitch to use as the SIP network server on page 5.
To configure TalkSwitch to act as the SIP server:
1. In the TalkSwitch System Configuration window, select System
Information -> VoIP Configuration from the menu on the left.
2. Select This TalkSwitch location is the Proxy/Registrar. The Public IP address or
Fully Qualified Domain Name will automatically be populated in the Proxy
Server Name and Registrar Server Name fields.
3. Leave the Outbound Proxy blank. In the Realm/Domain field, enter a name for
your network (example: abccompany).
4. To enable authentication, select yes (digest) from the drop-down list below
Registrar Authentication. Using authentication will allow only authorized
devices to access the network.
5. If Authentication has been enabled, enter a User/Account name (for example,
ABC) and system Password.
6. Information on reserving VoIP lines for each TalkSwitch unit is detailed in
STEP 3.
HTTP://GLOBAL.TALKSWITCH.COM
9
Advertisement
