Advertisement
Set the TalkSwitch public IP address
The public IP address of a TalkSwitch system is assigned by your Internet Service
Provider. Depending on the type of service, you will either have a dynamic or
static IP address. If you are unsure which type you have, contact your Internet
Service Provider.
The following steps describe how to set the public IP address of a TalkSwitch system:
1. Specify the Type of Public WAN IP for Internet Connection by selecting either
2. If this TalkSwitch system will act as the SIP server for a network and has a
8
dynamic or static from the drop-down list. For private networks, please ensure
the WAN IP address is the same as the Local IP address.
If this TalkSwitch system will act as the SIP server for a network, we
recommend having a static Public IP address. For more information on the
SIP server, refer to Select which TalkSwitch to use as the SIP network server on
page 5.
dynamic Public IP address, enter the Fully Qualified Domain Name (FQDN)
associated with the Public IP address. If the address is static, leave this
fieldblank.
You can obtain a FQDN from a Dynamic Domain Name Service (DDNS) provider
such as DynDNS (visit http://www.dyndns.com/services/dns/dyndns). Check
your router documentation to confirm which DDNS your router can support.
TALKSWITCH VOIP NETWORK CONFIGURATION GUIDE
Advertisement
