Driver - Sharp MX-M753U Start Manual

2
Click the [Standard installation] button.
When [Custom installation] is selected, you can
change any of the items below. When [Standard
installation] is selected, the installation will take place
as indicated below.
• Machine connection method: LPR Direct Print (Auto
Search)
• Set as default printer:Yes (excluding the PC-Fax

driver)

• Printer driver name: Cannot be changed
• PCL printer display fonts: Installed
If you selected [Custom installation], select [LPR
Direct Print (Auto Search)] and click the [Next] button.
If you selected other than [LPR Direct Print (Auto
Search)], see the following pages in the Operation
Guide:
• LPR Direct Print (Specify Address): page 1-86
• IPP: page 1-89
• Connected to this computer: page 1-91
3
Printers connected to the network are
detected. Select the machine and click
the [Next] button.
• Shared printer: page 1-96
SETUP IN A WINDOWS ENVIRONMENT
• If the machine is not found, make sure that the
machine is powered on and that the machine is
connected to the network, and then click the
[Re-search] button.
• You can also click the [Specify condition] button and
search for the machine by entering the machine's
name (host name) or IP address.
☞
Checking the IP address of the machine (page
32)
4
A confirmation window appears. Check
the contents and then click the [Next]
button.
5
When the printer driver selection
window appears, select the printer
driver to be installed and click the [Next]
button.
Click the checkbox of the printer driver to be installed so
that a checkmark (
• When the PC-Fax driver is being installed, this
screen does not appear. Go to the next step.
• The PS3 expansion kit is required to use the PS
printer driver or the PPD driver.
) appears.
35