Scanning Using The Keys On The Machine - Sharp MX-B200 Operation Manual

SCANNING USING THE KEYS ON THE MACHINE

When scanning is performed by this method, the application that has been set in
Button Manager will automatically start and the scanned image will be pasted into
the application. For the steps to allocate applications using the Button Manager or
other settings, see "Button Manager settings" (p.52).
• Scanning is not possible during a copy job.
• If the SCAN (
be stored.
• When scanning an original that has been placed in the SPF, only one
original can be placed unless you are using Sharpdesk.
Scanning from the operation panel of the machine
1
Press the SCAN (
The unit enters scan mode.
2 Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.26).
3
Press the right copy quantity
key to display the number of
the application that you wish to
use for scanning.
The application numbers are initially
as follows.
Application
number
SC1
SC2
SC3
SC4
SC5
SC6
To check the settings, see "Button Manager settings" (p.52) and then open
the settings window of the Button Manager.
) key is pressed during a print job, the scan job will
) key.
Application launched
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing
50
6