Reduction/Enlargement/Zoom; Selecting The Tray - Sharp MX-B200 Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom
function enables copy ratio selection from 25% to 400% in 1% increments. (When
the SPF is being used, the zoom copy ratio range is 50% to 200%.)
1
Set the original and check the paper size.
2
Use the copy ratio selector key and/or ZOOM (
select the desired copy ratio.
• To verify a zoom setting without changing the zoom ratio,
• To reset the ratio to 100%, press the copy ratio selector key
3
Set the reduction/enlargement ratio.
To decrease or increase the zoom ratio rapidly, press and hold
down the ZOOM (
stop at the preset reduction or enlargement ratios. To move
beyond these ratios, release the key and then press and hold it
down again.
To select a preset copy ratio:
Preset reduction and enlargement ratios are:
50%, 70%, 86%, 141%, and 200% .
To select a zoom ratio:
When a ZOOM (
ZOOM indicator will light up and the zoom ratio will
be displayed in the display.

SELECTING THE TRAY

Press the tray select (
Each time you press the tray select (
indicated by the paper feed location indicator changes in
the following order: paper tray 1, paper tray 2*, multi-bypass
tray.
* Peripheral device
press and hold down the copy ratio display (%) key. When the
key is released, the display will return to the copy quantity
display.
repeatedly until the 100% indicator lights up.
or ) key is pressed, the
) key.
) key, the location
30
) or ( ) key. However the value will
, ) keys to
4