Storing Scanning Settings - Network Scanning - Sharp MX-B201D Operation Manual

BEFORE USING THE SCAN TO USB AND NETWORK SCANNER FUNCTION

STORING SCANNING SETTINGS - Network Scanning

1
Click "Network Scanning" in the menu
frame of the Web page.
2
Click "Add" below the scan list.
Scan Mode settings
Item
Name Enter a name for the scan mode (up to 32 characters).
Colour Mode Select Full Colour, Grayscale, or Mono 2 gradation for the colour mode.
Resolution Select the resolution.
Select "On" to not scan the 4 mm around the edges of the image and
Void Area
instead attach a white border.
When "Mono 2 gradation" is selected for "Colour Mode", select "Red",
Light Source
"Green", or "Blue" for the light source.
File Type Select "PDF", "JPG" or "TIFF" for the file type of the scanned image.
Select "None", "MH (G3)", or "MMR (G4)" for the compression mode of
Compression Mode
the scanned image.
Pages Per File Select the number of pages per image file.
If you wish to use this scan mode as the default scan mode when storing
destinations, select the "Default Scan Mode" checkbox. The "Default
Default Scan Mode
Scan Mode" is also used for Scan to E-mail when the e-mail address is
directly entered or selected from an LDAP server.
If you need to change the
settings in a previously
stored scan mode, select
the scan mode and click
"Edit". To delete a scan
mode, select the scan
mode and click "Delete".
Description
3
Select the desired scanning settings.
Refer to the following table for information on
each setting.
4
When you have finished selecting the
settings, click "Submit".
The selected settings are stored.
- 54 -
Default setting
—
Full Colour
150 dpi
Off
Green
PDF
None
ALL
Not selected