Sharp MX-M1100 Software Setup Manual page 26

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
5
Configure the image of the machine.
An image of the machine is formed in the printer driver
configuration window based on the options that are
installed.
(1)
(1) Select the options that are installed on
the machine.
(2) Click the [OK] button.
To cancel the image settings, click the [Cancel]
button.
6
Click the [OK] button in the printer
properties window.
If automatic configuration fails, configure the settings manually.
• You can check the options that are installed and the tray settings by printing out the "All Custom Setting List" in the system
settings of the machine. Follow these steps to print out the "All Custom Setting List": Press the [SYSTEM SETTINGS] key,
touch the [List Print (User)] key, and then touch the [Print] key of "All Custom Setting List".
• Click the [Set Tray Status] button and the [Paper Type Name] button to check the settings of each.
Set Tray Status: The "Tray Settings" in "Paper Tray Settings" in system settings of the machine are reflected in the
Paper Type Name: The "Paper Type Registration" settings in "Paper Tray Settings" in the system settings of the machine
24
(2)
settings shown here. Specify the size and type of paper loaded in each tray.
are reflected in the settings shown here. If a user type name (1 to 10) was changed, enter the changed
name.