Siemens QBM3700 Series User Manual page 12

2
Commissioning
Fault detection, correction or reset
12 | 20
Value Error code
Value
(register 4x0002)
8 Calculation error
9 Extended error
10 EEPROM
protection active
11 Configuration error
LED status indication
Color Status
Red Blinking, 1 second on, 5 seconds off
Red Blinking, 0.1 second on, 1 second off
Orange Continuous
Orange Blinking, 1 second on, 5 seconds off
Orange Blinking, 0.1 second on, 1 second off
Green Continuous
Green Blinking
Green Flickering
Blue Continuous
Reset to factory setting
Use the push button to reset to factory settings. The Sensor is reset to delivered
setting. Factory settings are listed in the register list "Modbus registers" – default
values.
◈
Hold the push button for 20...30 seconds.
Reliability pressure
sensor (register
4x0004 + 4x0006)
Configuration error
Function
Internal error
Incorrect configuration
Waiting for on-event
addressing
Bus communication error
Device not configured
(factory settings)
Start-up
Normal operation
Bus communication
Reset zero point
Reliability analog
inputs (register
4x0008 + 4x0010)
Configuration error
A6V11841988_en--_b