Sharp MX-M1100 Maintenance Manual page 40

REMOVING MISFEEDS
Trays 1 to 4
Before pulling the tray out, be sure to verify that a misfeed has not occurred in the paper conveyor. If you pull the tray out
without checking, you may tear misfed paper and make it more difficult to remove the pieces that remain in the machine.
☞
Transport area (page 37)
1
Pull out trays 1 and 2.
2
Remove the misfed paper.
3
Remove the misfed paper from tray 1.
4
Remove the misfed paper from tray 2.
38
Gently pull out the tray until it
stops.
A misfeed has occurred inside
the machine. Look inside to
check.
After removing the paper, close
trays 1 and 2.
5
Pull out tray 3.
6
Lift the unit up off the tray.
7
Remove the misfed paper.
8
Place the unit on the frame.
9
Remove the misfeed from tray 4.
Follow the same procedure (steps 5 to 8) as for tray 3.
Gently pull out the tray until it
stops.
Place the unit on a level surface.
A misfeed has occurred inside
the machine. Look inside to
check. (Do not touch the metal
frame.)
After placing the unit on the
frame, close tray 3.