Digital Output Pin
The Digital I/O pin of the XMR can be toggled via command to have a high or low logic output of
3V at a maximum of 5mA. The command is as follows:
As seen below, only one of the possible four number combinations leads to a high output.
Parameter
$dOut
X
Y
Command
$dOut
$dOut
$dOut
$dOut
XMR User Manual 1.1
$dOut X Y
Purpose
Base Command
Capability to turn the pin on/off; Enabled (1) or disabled (0)
High (1) or Low (0)
Pin Enable/Disable
0
0
1
1
Output High/Low
0
1
0
1
Result
Output Low
Output Low
Output Low
Output High
23