Sending The Command - Xeos XMR Series User Manual

Once XeosOnline has a device's unlock code, all outgoing commands will have the code added at
the beginning of the message. The unlock code will only be changed if the firmware is updated,
or if commanded via:
Where XXXXX is the current code, and

Sending the Command

To send an sbd command, create a new email message with the following fields:
To
Subject
Body
Attachments
A confirmation will be immediately returned from the Iridium Gateway from the address
sbdservice@sbd.iridium.com indicating that your message is now in the message queue. It will
be delivered to the device during its next Iridium check.
Commands can be sent from any email address, but responses will be returned only to email
addresses on the unit's forwarding list.
XMR User Manual 1.1
$unlock XXXXX YYYYY
YYYYY is the new code to be used in the future.
data@sbd.iridium.com
The target device's IMEI
Empty
The .sbd file
12