Sony DCR-TRV320 Service Manual page 29

Searching a recording by date
– Date search
Notes
•The date search works only for tapes recorded
in the Digital8 system.
•If one day's recording is less than two minutes,
your camcorder may not accurately find the
point where the recording date changes.
If a tape has a blank portion in the recorded
portions
The date search function may not work correctly.
70
Searching for a photo
– Photo search/Photo scan
Scanning photo
(1) Set the POWER switch to VTR (DCR-
TRV620E) or PLAYER (DCR-TRV420E/
TRV520E).
(2) Press SEARCH MODE on the Remote
Commander repeatedly, until the photo scan
indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t
PHOTO SCAN
(3) Press . or >.
Each photo is played back for about 5 seconds
automatically.
2
SEARCH PHOTO 00
SCAN
MODE
3
To stop scanning
Press x.
Note
The photo search and photo scan work only for
tapes recorded in the Digital8 system.
If a tape has a blank portion in the recorded
portions
The photo search and photo scan function may
not work correctly.
72
Поиск записи по дате
– Поиск даты
Примечания
Если на записанной ленте имеются
незаписанные участки
Поиск фото – Фотопоиск/
Фотосканирование
Сканирование фото
(1)
(2)
t
t
. >
(3)
Для остановки сканирования
x
Примечание
Если на записанной ленте имеются
незаписанные участки
Searching for a photo
– Photo search/
Photo scan
You can search for the still image recorded on
tape (photo search).
You can also search for still image one after
another and display each image for five seconds
automatically (photo scan). Use the Remote
Commander for these operations.
Searching for a photo
(1) Set the POWER switch to VTR (DCR-
TRV620E) or PLAYER (DCR-TRV420E/
TRV520E).
(2) Press SEARCH MODE on the Remote
Commander repeatedly, until the photo
search indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t
PHOTO SCAN
(3) Press . or > to select the photo for
playback. Each time you press . or >,
the camcorder searches for the previous or
next photo. Your camcorder automatically
starts playback from the photo.
2
PHOTO 00
SEARCH
SEARCH
MODE
3
To stop searching
Press x.
— Editing —
Dubbing a tape
Using the A/V connecting cable
Connect your camcorder to the VCR using the
A/V connecting cable supplied with your
camcorder.
(1)Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2)Set the input selector on the VCR to LINE.
Refer to the operating instructions of your
VCR for more information.
(3)Set the POWER switch to VTR (DCR-
TRV620E) or PLAYER (DCR-TRV420E/
TRV520E).
(4) Play back the recorded tape on your
camcorder.
(5)Start recording on the VCR.
Refer to the operating instructions of your
VCR for more information.
S VIDEO
: Signal flow/
When you have finished dubbing a
tape
Press x on both your camcorder and the VCR.
1-17
Поиск фото
– Фотопоиск/
Фотосканирование
(фотопоиск)
(фотосканирование)
Поиск фото
(1)
(2)
t
t
. >
(3)
.
PHOTO 01
SEARCH
Для остановки поиска
x
— Монтаж —
Перезапись ленты
Использование соединительного
кабеля аудио/видео
(1)
(2)
(3)
(4)
(5)
IN
AUDIO/VIDEO
S VIDEO
VIDEO
AUDIO
Если Вы закончили перезапись ленты
x
>
71
73