Sony DCR-TRV320 Service Manual page 27

Making your own titles
To change a title you have stored
In step 3, select CUSTOM1 or CUSTOM2,
depending on which title you want to change,
then press the SEL/PUSH EXEC dial. Turn the
SEL/PUSH EXEC dial to select [C], then press
the dial to delete the title. The last character is
erased. Enter the new title as desired.
If you take 3 minutes or longer to enter
characters in the standby mode while a
cassette is in your camcorder
The power automatically goes off. The characters
you have entered remain stored in memory. Set
the POWER switch to OFF (CHARGE) once, and
turn it to CAMERA again, then proceed from
step 1.
We recommend setting the POWER switch to
VTR (DCR-TRV620E) or PLAYER (DCR-
TRV420E/TRV520E) or removing the cassette so
that your camcorder does not automatically turn
off while you are entering title characters.
If you select [ ]
The menu for selecting alphabet and Russian
characters appear. Select [ ] to return to the
previous screen.
To erase a character
Select [C]. The last character is erased.
To enter a space
Select [Z& ?!], then select the blank part.
62
— Advanced Playback Operations —
Playing back a tape
with picture effects
During playback, you can process a scene using
the picture effect functions: NEG.ART, SEPIA,
B&W and SOLARIZE.
During playback, press PICTURE EFFECT and
turn the SEL/PUSH EXEC dial until the desired
picture effect indicator (NEG.ART, SEPIA, B&W
or SOLARIZE) appears.
For details of each picture effect function, see
page 49.
To cancel the picture effect function
Press PICTURE EFFECT.
Notes
•The picture effect function works only for tapes
recorded in the Digital8 system.
•You cannot process externally input scenes
using the picture effect function.
•You cannot record pictures that you have
processed using the picture effect function with
this camcorder. To record pictures that you
have processed using the picture effect
function, record the pictures on the VCR using
your camcorder as a player.
Pictures processed by the picture effect
function
Pictures processed by the picture effect function
are not output through the DV IN/OUT or
DV OUT jack.
When you set the POWER switch to OFF
(CHARGE) or stop playing back
The picture effect function is automatically
canceled.
64
Создание Ваших собственных
титров
Для изменения сохраненного в
памяти титра
C
Если Вы вводите символы 3 минуты или
более в режиме ожидания в то время,
когда кассета находится в Вашей
видеокамере
Если Вы выбрали установку [ ]
Для удаления титра
C
Для ввода интервала
— Усовершенствованные операции воспроизведения —
Воспроизведение ленты с
эффектами изображения
PICTURE
EFFECT
NEG. ART
Для отмены функции цифровых
эффектов
Примечания
Изображения, обработанные с помощью
функции эффектов изображения
Если Вы установили переключатель
POWER в положение OFF (CHARGE) или
остановили воспроизведение
Inserting a scene
You can insert a scene in the middle of a
recorded tape by setting the start and end points.
The previously recorded frames between these
start and end points will be erased. Use the
Remote Commander for this operation.
[a]
(1) While your camcorder is in the standby mode,
keep pressing EDITSEARCH, and release the
button at the insert end point [b].
(2) Press ZERO SET MEMORY. The ZERO SET
MEMORY indicator flashes and the counter
resets to zero.
(3) Keep pressing the – 7 side of EDITSEARCH
and release the button at the insert start point
[a].
(4) Press START/STOP to start recording. The
scene is inserted. Recording stops
automatically near the counter zero point.
Your camcorder returns to the standby mode.
ZERO SET
MEMORY
Notes
•The zero set memory function works only for
tapes recorded in the Digital8 system.
•The picture and the sound may be distorted at
the end of the inserted section when it is played
back.
If a tape has a blank portion in the recorded
portions
The zero set memory function may not work
correctly.
Playing back a tape
with digital effects
During playback, you can process a scene using
the digital effect functions: STILL, FLASH, LUMI.
and TRAIL.
(1) During playback, press DIGITAL EFFECT
and turn the SEL/PUSH EXEC dial until the
desired digital effect indicator (STILL,
FLASH, LUMI. or TRAIL) flashes.
(2) Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the
bars appear. In the STILL or LUMI. mode, the
image where you press the SEL/PUSH EXEC
dial is stored in memory as a still image.
(3) Turn the SEL/PUSH EXEC dial to adjust the
effect.
For details of each digital effect function, see
page 51.
1
DIGITAL
EFFECT
2
STILL
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
•The digital effect function works only for tapes
recorded in the Digital8 system.
•You cannot process externally input scenes
using the digital effect function.
•You cannot record images that you have
processed using the digital effect function with
this camcorder. To record images that you have
processed using the digital effect function,
record the images on the VCR using your
camcorder as a player.
Pictures processed by the digital effect
function
Pictures processed by the digital effect function
are not output through the DV IN/OUT or
DV OUT jack.
When you set the POWER switch to OFF
(CHARGE) or stop playing back
The digital effect function is automatically
canceled.
1-15
Вставка эпизода
[b]
(1)
[b]
(2)
7
(3)
[a]
(4)
EDITSEARCH
Примечания
Если на ленте имеется незаписанный
участок
Воспроизведение ленты
с цифровыми эффектами
(1)
(2)
(3)
2
STILL
3
Для отмены функции цифровых
эффектов
Примечания
Изображения, обработанные с помощью
функции цифровых эффектов
Если Вы установили переключатель
POWER в положение OFF (CHARGE) или
остановили воспроизведение
63
65