Lubrication - Mec 4069 RT Operator's Manual

4069 RT

Lubrication

Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must be performed by a qualified
service technician.
Lubrication
No. ITEM SPECIFICATION
1 Hydraulic Mobile Fluid DTE 10, DTE 13 M, or AW32
Reservoir
Do not substitute other fluids as pump damage may
Fill to the middle of the sight gauge with platform in the
stowed position and outriggers (if equipped) retracted.
2 Hydraulic Filter Filter Element
(located inside Hydraulic Reservoir)
3 Hubs SAE 90 Multipurpose Hypoid Gear Oil
API Service Classification GL5
93075
4069 RT
Add Oil Here
LEVEL
Fill to Here
Gear Hubs Controls Module
result.
Hydraulic
Reservoir
Sight
Gauge
Filter
Housing
components removed for clarity
FREQUENCY
Check sight gauge level daily
Change yearly or every 600 hours, whichever
occurs first
Normal Conditions
Change every six months or 300 hours, whichever
occurs first
Severe Conditions--very dusty, exceptionally hot
or exceptionally cold conditions
Change every three months or 150 hours,
whichever occurs first
Check every three months or 250 hours, whichever
occurs first
Change yearly or every 1000 hours, whichever
occurs first
Maintenance
ART_4404
Routine Maintenance
Scheduled Maintenance
Scheduled Maintenance
Scheduled Maintenance
Page 29
April 2014