Volkswagen CC 2012 Workshop Manual page 17

14 - Fuel gauge sender 2 - G169-
❑ Note installation position on fuel tank
❑ Removing and installing
15 - Fuel
❑ Emptying ⇒ page 14
❑ Removing and installing
16 - Heat shield
❑ Bolted with clamping washers.
17 - Bolt
❑ Securing bolt of tensioning strap, heat shield and mounting for middle silencer. Secure support for centre
silencer to body ⇒ Rep. gr. 26 ; Exhaust pipes/silencers; Assembly overview - silencers
❑ Renew after removal
❑ 25 Nm
18 - Securing straps
❑ Use suitable workshop equipment to prevent the securing straps from turning while tightening the bolts.
19 - Protective plate
❑ For filler neck.
20 - Fuel delivery unit
❑ Removing and installing
❑ If fuel pump unit was renewed, adapt engine control unit to fuel pump ⇒ Vehicle diagnostic tester "Guided
functions".
❑ Checking fuel pump
❑ With fuel gauge sender - G-
❑ Removing and installing fuel gauge sender - G-
❑ Note installation position
❑ Clean strainer if soiled
21 - Rivets
22 - Flange with fuel filter
❑ With 6.2 bar pressure relief valve
❑ Removing and installing
❑ Note installation position
❑ Can be disconnected from fuel delivery unit
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
⇒ page 112
⇒ page 112
⇒ page 31
⇒ page 43
⇒ page 73 .
⇒ page 42
⇒ page 43
⇒ page 42
⇒ page 111
⇒ page 46 .
13
1. Fuel