Table of Contents
Advertisement
•
A damaged PTFE Compression Gasket
•
A scratch or other imperfection in the sealing surface on the sample
•
A chip on the end of the Glass Tube
The larger knurled nut on the adapter is used when it is time to remove the adapter. Without this nut, it is
difficult to grab the adapter firmly enough pull it out of the Cell Top. By turning the nut so that it presses against
the top of the cell, you can easily remove the adapter, no matter how deeply it is in the cell top.
Assembly--Inserting the Sample Holder into the Cell
16
Advertisement
Table of Contents
