Self-Test Feature Check; Warning Messages; Environment - Samsung SyncMaster 591S Manual

Your monitor provides a self test feature that allows you to check whether your monitor is
Check List
functioning properly.
Q & A
Self-Test
Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
SyncMaster 591S/793S/591V/793V/783DF/793DF
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
SyncMaster 591S/793S/591V/793V/783DF/793DF
1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to
2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3
3. Degauss the monitor if any devices were removed from the area.
If the monitor is functioning properly, you will see a box in the illustration below.
/795DF/797DF/793MB/795MB
This box appears during normal operation if the video cable becomes disconnected or
damaged.
monitor.
If your monitor screen remains blank after using the previous procedure, check your
video controller and computer system; your monitor is functioning properly.
If there is something wrong with the input signal, a message appears on the screen or
the screen goes blank although the power indicator LED is still on. The message may
indicate that the monitor is out of scan range or that you need to check the signal cable.
/795DF/797DF/793MB/795MB
The location and the position of the monitor may influence the quality and other
features of the monitor.
another room.
feet (one meter) of the monitor.
|

Self-Test Feature Check

Warning Messages

SyncMaster 997DF
|

Environment

SyncMaster 997DF
|
Useful Tips