Linux Operating System - Samsung SyncMaster 591S Manual

7. Choose " Display a list of all the driver in a specific location.. " then click " Next " button.
8. Click the " Have Disk " button
9. Specify A:\(D:\driver) then click " OK " button.
10. Select " Show all devices " and choose the monitor that corresponds to the one you
connected to your computer and click " OK ".
11. Continue choosing " Close " button and " OK " button until you close the Display Properties
dialogue box.
(You can get some other screen for warning message or others, then click the appreciate
option for your monitor.)
®
Microsoft Windows
1. Click Start , Settings , Control Panel , and then double-click Display icon.
2. In Display Registration Information window, click Settings Tab and then click All Display
Modes .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click OK .
4. Click Apply button if you see the screen working normally after clicking Test. If the screen
is not normal, change to a different mode (lower mode of resolution, colors or frequency).
Note : If there is no Mode at All Display Modes , select the level of resolution and vertical
frequency by referring to the

Linux Operating System

To execute X-Window, you need to make the X86Config file, which is a type of system setting
file.
1. Press Enter at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse .
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard .
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor .
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor . This information will not affect the actual
execution of X-Window.
10. You have finished setting up your monitor.
Execute X-Window after setting other requested hardware.
®
NT Operating System
Preset Timing Modes in the user guide.