Inserting And Ejecting The Memory Stick; Inserting The Memory Stick; Removing The Memory Stick - Samsung SCD180 Owner's Instruction Book

ENGLISH
Digital Still Camera mode
Inserting and removing the Memory Stick
Inserting Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the Memory Stick slot located on the camcorder,
in the direction of the arrow.

Removing the Memory Stick

1. Turn the Power switch to OFF.
2. Remove the Memory Stick by pushing the card in and letting it spring out.
Do not attempt to pull the Memory Stick out without first pushing it in.
Notes
If you turn the power switch to M.PLAY, the last recorded image appears.
- If there are no recorded images on the Memory Stick, NO STORED IMAGE!
and will display on the screen.
Do not turn the power off while recording, loading, erasing or formatting.
Please turn the power off before you insert or remove the Memory Stick.
You could lose data on the Memory Stick.
Do not allow metal substances to come in contact with the terminals of the Memory Stick.
Do not bend, drop or apply strong shock to Memory Stick.
After pulling the card out from the camcorder, please keep the Memory Stick in
a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse, static electricity,
electric noise or repair. Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the
(FWD), (REV) buttons are not available in M.PLAY mode.
78 78
(DELETE), (S.SHOW),