Date/Time - Samsung SCD180 Owner's Instruction Book

ENGLISH
Advanced Recording

DATE/TIME

The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.
The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Push the MENU DIAL to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
You can choose between - the OFF, DATE, TIME and DATE/TIME modes
OFF only
DATE only
TIME only
DATE & TIME
To return to the previous menu, highlight DATE/TIME in the middle of the menu
and push MENU DIAL.
6. To exit, press the MENU button.
Notes
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
The DATE/TIME will read "- - -" in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera's memory.
- When the battery becomes weak or dead.
Before you can use the DATE/TIME function, you must set the Clock.
52
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME