Adjusting The Lcd During Play; Controlling Sound From The Speaker - Samsung SCD180 Owner's Instruction Book

ENGLISH
Basic Recording

Adjusting the LCD during PLAY

You can adjust the LCD during playback.
The adjustment method is the same procedure as used in CAM mode. (see page 29)

Controlling Sound from the Speaker

Notes regarding the rotation of the LCD screen
The Speaker works in VCR mode only.
When you use the LCD screen for playback, you can hear the recorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the VCR mode.
- Take the following steps to lower the volume or mute the sound while playing a tape
on the VCR.
1. Set the power switch to VCR mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU DIAL to adjust the volume.
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19 and you will not hear
any sound when the volume is set on 00.
If you close the LCD while playing, you will not hear sound from the speaker.
32
REV
2
S.SHOW
FWD
DELETE
3-1
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
10:00 PM
JAN. 1, 2 0 0 2